This article walks you through the complete process of diagnosing and resolving tire pressure monitoring system (TPMS) problems on a 2019 BMW 730Li with Launch Creader TPMS 5011 V2/511S V2.
This detailed guide enables technicians to troubleshoot TPMS issues, inspect sensor functionality, and verify that the tire pressure monitoring system is operating correctly.
Step-by-step guide:
Turn on TPMS 5011 V2
Select TPMS-> BMW-> 7 Series-> 2014/10-2022/12 (433MHz) [G11/G12]
Note: If multiple menus exist for the same model year, try another one if activation fails.
Select [Active] to activate the four tire pressure sensors
The FR, RR, and RL wheel sensors are successfully activated, but the FL wheel sensor fails to be activated, so it is confirmed that the FL wheel sensor is damaged.
Remove the failed sensor, choose [Learning], and check the sensor part number or print number under the selected menu. Proceed only if one of them matches.
Note: If it is an original sensor, verify; if it has been replaced with a different brand sensor, proceed to next step.
Click [Programming] and choose [Auto]
Note: You can also choose [Manual] to input the original vehicle sensor ID or [Copy by OBD] to copy the sensor ID. For sensors programmed using this method, if the instrument panel does not display tire pressure values, the BMW learning method is still required for learning process.
The programming is completed
Install the programmed Launch tire pressure sensor to the FL wheel and inflate the tire to the standard pressure.
Choose [Active] to activate the Launch tire pressure sensor at the FL wheel position
Click [Learning] and perform the operation using the automatic learning method.
Learning: After locking the vehicle and allowing it to sleep for 20 minutes, you need to select tire pressure reset on the central control screen and then conduct a road test at a speed above 25 km/h. Drive until the tire pressure reset progress bar is completed, the tire pressure light on the instrument panel goes out, and the tire pressure value is displayed normally.
Learning is completed by Launch TPMS 5011 V2 .
Video guide:
