Launch X431 EV Diagnosis Add-On Kit includes activation card and adapters for specific electric vehicles to perform battery pack analysis. It is compatible with X431 PAD V/PAD VII, PRO5, PROS 5.0, V+ 5.0, PRO3S+ V5.0, PRO3 ACE, PRO3 APEX, etc. Here we will take Launch X431 PAD V as an example to show you how to activate and use the New Energy Battery Pack.
1.Activate EV Diagnosis add-on kit
Go to Mall>> Software Store>> Other Software Packages>> EV Diagnosis Add-On Kit>> Subscription Renewal Card Pay>> Subscription Renewal Card Pay
Take out the activation card
Enter 24 subscription renewal card pin code
Activate successfully
2.Update software
Go to Software Update and select the vehicle software to update
Note: The software downloaded depends on the vehicle type.
3.Use EV Diagnosis Add-on Kit and Launch diagnostic tool
Connect the OBD connector to the socket with the cable from EV Diagnosis Add-on Kit
Click [Local Diagnose]
Select the car brand (e.g.TRUMPCHI) you need to diagnose
Note: You can quickly find the car brand by entering the model name (e.g.TRU) in the searching box on the right upper side.
Click [Automatically Search] and select [Aion S Plus]
Confirm the vehicle info (this car is a 2021 TRUMPCHI Aion S Plus)
Click [Smart Detection]
4.Use X431 EV Diagnosis Add-on Kit for New Energy Vehicle Battery Pack Diagnosis
Method 1: OBD2 Connector Diagnostic Battery Pack
You can use the diagnostic connector to directly connect to the vehicle OBD interface for diagnosis.
To use the battery pack diagnostic function, you need to activate the Launch X-431 EV Diagnosis Add-on Kit first.
Connect the OBD connector to the socket with the cable from EV Diagnosis Add-on Kit
Click [Local Diagnose]
Click [Battery pack detection]
Click the car brand (e.g.TRUMPCHI) and passenger vehicle battery pack software (e.g. V10.24)
Click the car model (e.g. Alion S Plus)
Click [BMS, model GAM7001BEVA0E, TZ180XYA1203, 399V, 175.5Ah]
Click “Enter” of “Mode 1: OBD connector diagnosis”
It will analyze the battery pack data
We also can check the battery pack info, voltage details, temperature details, battery status info, and slave board temperature data
Click [Report]
Select Pre-Repair as the report type, and click “OK”
Then the vehicle battery test report will be generated.
Click [Save] to save the report
You can click [Share] to share this test report to others via mailbox server, send by LAN, ES save, ES sender, nearby share, and share to mobile.
If you want to share by mailbox server, you need to enter your email address then you can read the report in your mailbox.
Method 2: Jumper Diagnostic Battery Pack
You can use the jumper to connect the battery pack DLC for diagnosis.
Turn the key off, then disconnect the negative electrode of the 12V battery and wait for more than 15 minutes
Lifting the car…
Wrap the plug of the high voltage wiring harness and the heat dissipation pipe of the battery pack with the insulation tape
Remove the EV battery pack
Connect the OBD connector to the socket with the cable from LAUNCH EV Diagnosis Add-on Kit, and connect to Launch Smart Box (SmartLink C)
Click [Local Diagnose]
Click [Battery pack detection]
Select the car brand and diagnostic software
Select the car model
Click “Enter” of “Mode 2: Jumper Diagnosis”
You can check the battery pack data analysis, battery pack info, voltage details, and temperature details.
Method 3: Jumper Diagnostic without Connector Battery Pack
Connect the Matching Adapter to the Jumper Cable
Connect the Matching Adapter to the EV Battery Pack
Then go to [Local Diagnose] function on the X431 PAD V diagnostic tool
Select [Battery pack detection], the corresponding car brand, and car model you desire
Click “Enter” of “Mode 2: Jumper Diagnosis”
Then you can check the battery pack data analysis, battery pack info, voltage details, and temperature details.
LAUNCH X431 EV Diagnostic Electric Vehicles Upgrade Kit & Activation Card:
https://www.launchx431.fr/wholesale/launch-ev-diagnostic-kit.html