How to clone Volkswagen POLO ID48 (96 bit) chip by Launch X431 IMMO ELITE?
X431 Key Programmer is required. Follow this guide to operate easily.
Simple guide:
1. Put the original car key into the Launch X431 Key Programmer to read the key info
2. Then click “ID48 (96 bit) online calculation to clone the chip data.
3. Follow the on-screen prompt to operate and click “Start clone”
- Put the original key into LAUNCH to recognize.
- Close the LAUNCH antenna to the ignition switch (detection coil) of the car to collect.
If the original key is normal remote, insert the original car key, turn on the ignition switch, turn off the ignition switch, and take out the original car key. Repeat this step until collection finishes.
If it is a smart key, remove the key battery, put the smart key close to the detection area, light up the instrument, turn off the ignition switch, and take away the key. Repeat this step until collection finishes.
If it’s Volvo model, each time can collect 1 set data, then disconnect power to collect next set data.
5 steps to calculate ID48 (96 bit) online:
Step 1: Identification
Step 2: Sniffer data
Step 3: Upload
Step 4: Calculate
Step 5: Query
After copying the chip successfully using X431 IMMO Elite and Key Programmer, put the chip into the key to start the vehicle, and you can control it separately. It needs to be matched on the anti-theft software.