This guide explains how to perform key adding on a 2025 GAC Trumpchi Yingbao using LAUNCH X431 IMMO series tools (X431 IMMO Plus/IMMO Elite/IMMO Pro) with X431 Key Programmer via OBD.
Step 1: Generate Remote
Navigate to: Vehicle Remote -> All remotes-> YingBao ID4A-> Generate
Wait for the system to complete the burning process.
Burn successfully
Step 2: Key Matching Procedure
Go to:
IMMO-> GAC Trumpchi-> GAC Trumpchi IMMO Program V10.30-> Anti-theft key matching-> Automatically Search-> EMPOW 2024
Confirm the vehicle info, click “YES” to continue
Select “Smart Key (With PEPS)”
Preparation Tips:
- Have the remote key ready and place it near the vehicle’s center console.
- Ensure the key battery is fully charged.
PIN Code Requirement:
- Enter the 8-digit PIN code when prompted.
(Note: You may need to contact an online service or dealer to retrieve the correct PIN.)
Step 3: Learn Keys
Place the new key to be learned inside the vehicle, close to the start button.
Once the key is recognized, remove it from the vehicle.
Insert the next key into the vehicle and repeat the learning process.
Step 4: Finalize
After all keys have been learned, press No to exit the key learning mode.
The screen will confirm:
- Key learning succeeded.
- Current number of keys: 2
- Keys successfully learned.
Done! 2025 GAC Trumpchi Yingbao new keys was added by Launch X431 IMMO tools.
Video guide: