LAUNCH X431 Key Programmer can be used to work with LAUNCH X431 Tablet such as X431 IMMO Plus, X431 IMMO Elite, PAD VII, PAD V, PROS Elite, CRP919EBT, Pro5, etc to identify car key chips and generate various types of chip models from super remotes, read the remote control frequency of car keys, and generate remote control devices for different car models from various types of super remotes.
Kindly notice:
The new X431 PRO5 with SmartLink C has a Type-C connector so that you can use it to directly connect with X431 Key Programmer.
The old X431 Pro5 with SmartBox doesn’t have a Type-C connector, and you need an extra OTG USB Micro to USB-C Adapter to work with X-431 Key Programmer.
X431 Key Programmer Function:
- Read Transponder
- Generate Transponder
- Detect Frequency
- Detect Ignition Switch Coil Signal
- Generate Remote (Launch X-431 Remote)
- Set Type of Super Chip
- Set Type of Wireless Remote
- Unlock Toyota Smart Key
- Compatible with Launch Super Chip & VVDI Super Chip
Function display:
i.e. work with Launch X431 PAD V
Connect X431 PAD V Elite scanner and X431 Key Programmer
Select X431 PAD V on the home menu
1.Software location
Select Other Modules>> Toolbox>> Key Programmer
Then you can see all the available functions.
2.Read Transponder
Put the transponder in the coil of X-431 Key Programmer and keep it stable
Then click “Read Transponder”
The IMMO type, ID, status and cloneable status will be read soon.
3.Generate Transponder
Put the transponder in the coil of X-431 Key Programmer and keep it stable
Then click “Generate Transponder” and “Generate”
4.Use X431 register to the car
- Immobilizer transponder
- Alarm remote control
Note:
*Most of the transponder key remote control learning by manual
*Smart key will learn together with immobilizer transponder
5.Detect frequency
Recommend distance 0-2cm
- Detect Ignition Switch Coil Signal
Put the transponder in the coil of Launch X-431 Key Programmer and insert the key into car
Video guide: