Launch X431 Universal Remote Keys List Update

Launch X431 Universal Remote Keys can be used with Launch X431 Key Programmer/Remote Frequency Tester and X431 IMMO Plus/IMMO Elite/PAD V/PAD VII, etc to detect frequency and generate key. Check the newest remote key list and the generation guide.

 

Download the newest Launch universal remote key list here.

 

How to use Launch X431 Remote Maker and Launch Super Remote?

The Launch remote keys can be applied in different situations according to actual requirements. It supports repeatable writing and batteries with button cell 2032 need to be installed while generating. LS NISN-01, LN PUGOT-01 and LE FRD-01 support wireless programming. Wired programming is applicable to LK VOLWG-01, which is not equipped with an anti-theft chip and needs to be used with an anti-theft chip (the key chip programming cable is required for wired programming).

 

1.How to set type of Launch Super Chip?

Step 1: Connect the X431 Key Programmer to the Type C plug of the USB A to Type C converter, and the USB A plug to the Type A USB port of the Launch X431 diagnostic tool (i.e. X-431 IMMO Plus)

Step 2: Tap Set type of super chip and select the corresponding key chip type.

Step 3: Place the super chip into the induction coil area of the Launch X-431 Key Programmer

Step 4: Once successfully generated, it can be used.

 

2.How to use Launch LE FRD Super Remotes?

Step 1: Connect the key programmer to the Type C plug of the USB A to Type C converter, and the USB A plug to the Type A USB port of the Launch diagnostic tool.

Step 2: Tap Vehicle Remote and select the corresponding available super remote

Step 3: Select the corresponding key and place the super remote key on the top of the key programmer to generate.

Step 4: After the remote control is successfully generated, enter Set type of super chip to generate the corresponding key chip.

 

3.How to use Launch LS NISN Super Remotes?

Step 1: Connect the key programmer to the Type C plug of the USB A to Type C converter, and the USB A plug to the Type A USB port of the diagnostic tool.

Step 2: Tap Vehicle Remote and select the corresponding smart key model to generate.

Step 3: Place the smart remote key on the top of the key programmer

Step 4: Double check the remote information and tap Generate.

 

4.How to use Launch LN PUGOT Super Remotes?

Step 1: Connect the key programmer to the Type C plug of the USB A to Type C converter, and the USB A plug to the Type A USB port of the diagnostic tool.

Step 2: Tap Vehicle Remote and select the corresponding electronic key model to generate.

Step 3: Place the electronic remote key on the top of the key programmer to generate.

Step 4: Double check the remote information and tap Generate.

Step 5: For car models without electronic keys, enter Set type of wireless remote to generate the corresponding key.

 

5.How to use Launch LK VOLWG Super Remotes?

Step 1: Connect the key programmer to the Type C plug of the USB A to Type C converter, and the USB A plug to the Type A USB port of the diagnostic tool.

Step 2: Tap Vehicle Remote and select the corresponding key model to generate

Step 3: Connect one end of the key chip programming cable to the remote key chip, and the other end to the Type C port of the key programmer. Tap Generate to generate.

 

Launch X431 Key Programmer with 4pcs Universal Remotes and 1 Super Chip:

https://www.launchx431.fr/wholesale/x431-key-programmer.html

www.launchx431.fr