Here is a quick guide to set up (start) and update Launch X431 Creader Elite 2.0 FGC to use.
PART I
Set up X431 Elite 2.0 FGC
1.Power on X431 Elite 2.0 FGC scanner
2.Tap “Start” to complete the initialization
3.Select language, there are 11 languages available.
(English, French, Spanish, German, Russian, Italian, Portuguese, Japanese, Korean, Traditional Chinese, Polski)
4.Set your time zone
5.Connect to a Wi-Fi with good signal
6.You also can view code.
7.Personalize your device ID (You can skip here to set later).
8.Accept all “User Agreement Declaration”, press OK.
Note: The steps are the same as X431 Elite V2.0 BBA, click here to review.
PART II
Update Creader Elite 2.0 FGC software and firmware
Click “Upgrade” on the main menu
Select “Update” to download and install the newest firmware, car software, and the supported functions
After configuration, the Launch Creader Elite 2.0 FGC scanner is ready to use
PART III
Use X431 Creader Elite 2.0 FGC
Connect X431 Creader Elite 2.0 FGC to the vehicle you desire via OBD cable to perform the available function
For example:
- Read data stream
- PROXI Configuration Alignment (Replace ECU)
Select “Diagnose” function
Auto scan VIN and detect the vehicle system
Diagnose all systems
Check the health report (also can share it)
Special function>> PROXI Configuration Alignment (Replace ECU)
Read data stream
