What is the difference between LAUNCH X431 PRO3 APEX, XTOOL D9PRO, Foxwell NT1009 Scan Tool? Check the software and hardware comparison table below.
| Item | X431 PRO3 APEX | XTOOL D9PRO | FOXWELL NT1009 |
| Image |  |
 |
 |
| VCI | DBSCarVII | XVCI Max | VCI Dongle |
| CPU | 2.0GHz 4-Core 1 | 1.8GHz 4-Core | 2.0GHz 4-Core |
| OS | Android l0.0 | Android l0.0 | Android 9.0 |
| RAM | 4GB | 2GB | 4GB |
| ROM | 64GB | 128GB | 64GB |
| Resolution | 1280X800 | 1024X768 | 1280X800 |
| Rear Camera | 8MP | 8MP | 5MP |
| Battery | 6300mAh,7.6V | 10000mAh,7.3V | 6300mAh,3.7V |
| Services | 37 | 42 | 31 |
| Topology Map | √ | √ | × |
| Software Mall | √ | × | × |
| FCA | √ | × | × |
| ADAS | √ | × | × |
| Key Programming | √ | × | × |
In sum:
All are good scanners.
1. They are equipped with different VCIs.
Launch comes with DBSCarVII, Xtool comes with XVCI Max, and Foxwell comes with VCI Dongle.
2. PRO3 APEX and NT1009 support the same CPU, RAM, ROM, and Resolution.
3. PRO3 APEX and D9PRO support the same Android operating system and rear camera, and both support topology map.
4. Launch PRO3 APEX is the most cost-effective tool that supports the most functions.
XTOOL D9PRO is the most expensive. Though Foxwell is cheaper, it supports fewer functions than others.
In a word, if you need a comprehensive OBD scan tool (under 1,000 euros) that supports Topology map, software mall, FCA, ADAS, key programming, etc, Launch X431 PRO3 APEX Scanner is the best choice.