Launch X431 PAD V with Toyota/Lexus Diagnostic Software V51.20 (or newer) can set the remote door lock for Toyota models. (e.g. Toyota Camry 2024). To use this special function, ensure the engine/power switch is ON (engine off, with the ‘READY’ indicator lamp off).”
Operation guide:
Select [Local Diagnose] on the main menu
Select TOYOTA-> Toyota/Lexus Diagnostic Software V51.20-> OK
Select 16PIN DLC (North America)-> Camry-> 2024-> A25A-FKS-> w/Smart Key-> w/EPB (Electrical Parking Brake)
Confirm the vehicle info
In the [System List], select [TS (Telematics System)] and [Enter]
This ECU controls the one to send/receive information by wireless.
Note: Telematics cannot communicate with Diagnostic tool for approximately 20 seconds after IG ON.
Select Special Function-> Remote Door Lock Setting
Read the remote door lock setting usage and introduction
Confirm the following conditions:
-Turn the engine/power switch ON (Engine OFF/Ready OFF)
Press “OK” to proceed
Select [Remote Door Lock Available] or [Remote Door Lock Not Available]
Start setting…
Wait a while until the remote door lock setting is complete
It will show the current setting status.
Video guide:
Toyota Camry 2024 Remote Door Lock Setting by Launch X431 PAD V Elite