How to perform the Tire Pressure ID Registration on NISSAN by Launch X431 PAD V Elite? Here take SENTRA 2024 B18 as an example to show the step-by-step guide below.
Execution Background:
1.BCM (Body Control Module) replaced
2.Tire pressure sensor replaced
3.There are related DTCs (Diagnostic Trouble Codes)
Nissan TPMS ID Registration Procedure:
1.Connect device
Turn on the vehicle ignition switch
Connect the X431 PAD V connector
2.Scan vehicle systems
Select the Nissan model software (V44.70 or later) to enter the menu interface.
Choose [Manually Select] → [North America] → [American Samoa] → [SENTRA] → [B18] → [02/2024–].
Click [Smart Detection] to scan the full vehicle systems.
3.Read Fault Code
Select [System List] → [Engine Control Module (ECM)].
Choose [Read Fault Code] to view current DTCs
4.Register TPMS ID
Return to the previous menu and select [WORK SUPPORT].
Choose [ID Regist].
Click [Start] to prompt the activation info.
Click [OK] to continue
Before activation, each ID is displayed as “Inactive”
Use professional tire pressure equipment (i.e. TPMS 5011 V2, CRT5011E, and iTPMS TPMS Tool) to activate the IDs in the following order:
FL wheel → FR wheel → RR wheel → RL wheel.
Wait a while until all IDs are activated, and the ID registration status is “Registered”
5.Clear Fault Code
Click [Stop] to return to the special function menu interface, and return to the previous menu to choose [Clear Fault Code]
6.Verify
Read the DTC, and it shows that there is no DTC.
Drive the car for a road test, and check whether the tire pressure display on the central control screen is normal.
Video guide: